data sheet for perlite ready mix

SAFETY DATA SHEET PERLITE According to Regulation (EU) No 453/2010 Provide adequate ventilation. Observe occupational exposure limits and minimize the risk of inhalation of dust. Respiratory equipment No specific recommendation made, but protection against nuisance dust must be used when the general level exceeds 10 mg/m3. Hand protection

table 4 -typical properties ** and mix proportions for perlite concrete typical properties typical mix properties cement to aggregate ratio (by voulme) dry density range lb/ft 3 minimum compressive strenght lb/in 2 wet density rang e lb/ft 3 cement ft3 perlite ft3 water gallons aea † 1:4 1:6 36 -42 24 -30 300 125 48 -56 38 -44 6.75

Safety Data Sheet SDS No. GB-5002. Ready Mix Joint Compounds . Product Name. ... Perlite . 93763-70-3 <10 . magnesium aluminum phyllosilicate Attapulgite Clay : 12174 ...

Material Safety Data Sheet MSDS No: GB-5002 Page 1 of 7 Ready Mix Joint Compounds Date: May 22, 2006 ... Perlite 93763-70-3 <10

Perlite Concrete Density: 1,650 Kg / m³ (103 lb/ft³) Perlite lightweight concrete can achieve compressive strength ranging from 0.5 – 35 MPa (N/mm2) or 72 – 5,000 PSI. Viceroy Hotel – Lightweight Floor Screeds. Density: 1,800 Kg / m³ (112 lb./ft³) Strength: 30 MPa (4,350 PSI) Khalifa Stadium – Lightweight Screeds.

Perlite is a naturally occurring volcanic glass consisting of fused sodium-potassium-aluminum silicate. Tests conducted on Perlite have not identified crystalline silica as being present above the detection limit (0.05%).

Ready-Mix Joint Compounds & Textures Safety Data Sheet Revision date: 04/20/2018 Version: 9.0 Page 2 of 8 GHS08 Danger • May cause cancer (Inhalation). • May cause damage to organs (lung, kidney, liver, thyroid gland, and immune system) through prolonged and repeated exposure (oral and inhalation).

Submittal Sheet 09210 Structo-Lite ® Basecoat Where a lightweight, high-thermal-conductivity conventional plaster application is desired – Mill-mixed perlite-aggregate gypsum plaster; requires only the addition of water at the jobsite. – Ideal where it is not desirable to mix aggregate with plaster on the job.

Sproule WR-1200® is a pre-formed, high-temperature, non-wicking pipe and block insulation.It is composed of expanded perlite that is uniformly reinforced with a high-strength fiber for use on systems operating up to 1200°F (649°C).

Gulf Perlite is a manufacturer of Expanded Perlite; a Natural, Lightweight, Non-Combustible, Inert, mineral used for Constructional, Horticultural, Cryogenic & Industrial applications. Our Engineering department provides Perlite-based sustainable applications & solutions which add “real” value to projects, we work around-the-clock to offer ...